Need help?Do you have a question about the Soundstream TR1600/2 and is the answer not in the manual?
Guide for selecting appropriate wire gauge based on current draw and wire length.
Diagram and instructions for proper wiring, including grounding and cable routing.
Guide on connecting RCA or speaker-level inputs and using the 12dB attenuation switch.
Step-by-step instructions for setting amplifier input gain to minimize noise and distortion.
Guidance for diagnosing and resolving common problems like no sound or single channel operation.
Guide for selecting appropriate wire gauge based on current draw and wire length.
Diagram and instructions for proper wiring, including grounding and cable routing.
Guide on connecting RCA or speaker-level inputs and using the 12dB attenuation switch.
Step-by-step instructions for setting amplifier input gain to minimize noise and distortion.
Guidance for diagnosing and resolving common problems like no sound or single channel operation.
General| Channels | 2 |
|---|---|
| Power Output (Max) | 1600W |
| Impedance | 2-4 Ohms |
| THD | <0.05% |
| Signal-to-Noise Ratio | >95dB |
| Crossover Type | Variable High-Pass/Low-Pass |
| Bass Boost | 0-12dB @ 45Hz |
| Fuse Rating | 40A x 2 |
| Input Sensitivity | 200mV - 4V |
To Next Page
