Removal:
1 ) Press the button.
3) Take
faceplate
off
of
the mounting
plate.
5) Detach the trim
bezel.
7)
Pull
the unit out
of
the mounting
sleeve.
Note:
2)
Safely
detach the faceplate.
4) Take the
panel
out.
6)
Insert
the keys into the opening between
the unit
and the mounting
sleeve
to unlock.
8)
Illustration
of
removal.
Before starting
installation
of
the unit, make sure the wiring is connected
properly.
Use
only
the parts provided with the unit to ensure proper
installation.
The use
of
unauthorized parts may cause
malfunction.
Install
the unit where it does not get
in
the driver's way and
will
not injure the passenger
in
case
there is a sudden stop, like
an emergency stop.
The
control panel
can
easily
be damaged by shocks. After removing it,
place
it
in
a protective
case and be careful
not to drop it
or
subject it to strong shocks.
The rear connector that connects the main unit and the
control panel
is
an
extremely important
part. Be
careful
not to damage it by pressing on it with
fingernails,
pens, screwdrivers, etc.
6
To Next Page
Loading...
