SA247 True Spring Reverb User Guide 29
reverb tank. Choose “Wet/Dry Mix” and the tremolo circuit is place after the reverb tank and
applies to both the dry and reverb signals.
• Depth: Sets the depth of the tremolo effect. As you increase the Depth control, your tremolo
effect will become more pronounced.
• Rate: Adjusts how fast the tremolo effect modulates.
• Stereo Offset: When running a stereo rig, the Stereo Offset control adjusts the degree of
separation in the tremolo’s stereo ping-pong effect. Turn the Stereo Offset all the way to the
left for a mono (or “dual mono”) effect or all the way to the right for a full 180° stereo ping-
pong effect.
• Tap Tempo Beat Division: Select between five tap tempo beat divisions: quarter, eighth,
dotted eighth, triplet, and sixteenth notes.
• Tap Tempo Assign: Choose which parameter(s) the external Tap Switch controls: tremolo
rate, reverb modulation rate, or both tremolo and reverb rates simultaneously.
Dwell and Tone Knob Assign
Changes both the primary and alternate functions of the pedal’s DWELL and TONE knobs. It is
possible to change the assigned parameters for these knobs in each of the six toggle switch positions
and the 128 MIDI accessible presets.
• Normal Dwell Knob Assign: Use the dropdown menu to select which parameter will be
controlled by the DWELL knob.
• Alternate Dwell Knob Assign: Use the dropdown menu to select which parameter will be
controlled with the DWELL knob’s alternate function. To access the knob’s alternate function,
press and hold the CONTROL INPUT button on the top of the pedal while turning the knob.
• Normal Tone Knob Assign: Use the dropdown menu to select which parameter will be
controlled by the Tone knob.
• Alternate Tone Knob Assign: Use the dropdown menu to select which parameter will be
controlled with the TONE knob’s alternate function. To access the knob’s alternate function,
press and hold the CONTROL INPUT button on the top of the pedal while turning the knob.
To Next Page
Loading...
