Master Controls
Link: The Ultrawave’s two discrete channels are linked by default in the preset editor to create one
master channel, for those presets that really only need one channel. De-select “Link” to access and
edit Channel 2.
Copy: When Ch. 1 and Ch. 2 are unlinked, the Copy arrows allow you to copy settings from Channel 1
to Channel 2, or from Channel 2 to Channel 1. The channel that is highlighted is the channel you are
currently editing. Use the arrows to select the target channel.
Routing Option: The Ultrawave utilizes stereo inputs and outputs, so the Routing Option selects how
you want them to be configured in conjunction with the 2 channels. You can also choose to run both
channels in parallel in mono, and even cascade Channel 1 into Channel 2 for more tonal complexity
and possibility. See the Stereo Operation & Signal Routing section for a detailed explanation of each
routing option.
On/Off State: This lets you toggle whether the effect is ON or bypassed and can be saved as a part of
the preset for easy recall.
To Next Page
Loading...
