South-Tek Systems N2Blast FPS-650 User Manual

FPS-650 and FPS-1250 South-Tek Systems
Version: 7
Revision Date: 9/6/19 Page 25 of 29
BLASTOFF™ - LEAK DETECTION SYSTEM:
“There is an alarm sounding in the FPS-650 and
FPS-1250 and the control panel has ‘b ōFF’
illuminated on the side panel of the unit.”
If you hear the alarm and the “b ōFF” is displayed on your unit, it
means that it is equipped with “The BlastOff
™
- Leak Detection” feature. If the
buzzer is on, there may be a leak in one of the sprinkler lines, AMD, or fittings
may not be properly seated, causing leaks. Note: Turn off this unit’s on/off
power switch and check for leaks. If none are found, leave the unit turned off
and contact your Service Technician. Once the leak has been fixed, turn the
N
2
Blast
™
on/off rocker switch back “On” to resume normal operation. By
turning the system power off, then back on, this will reset the BlastOff™
automatically.

South-Tek Systems N2Blast FPS-650 Specifications

General

Brand	South-Tek Systems
Model	N2Blast FPS-650
Category	Inverter
Language	English