To Next PageTo Next Page
Need help?Do you have a question about the Southwire 21005N and is the answer not in the manual?
General| Model | 21005N |
|---|---|
| Brand | Southwire |
| Category | Measuring Instruments |
| Type | Clamp Meter |
| Display | Digital |
| Max Voltage | 600V |
| AC Current | 400A |
| Max Current | 400A |
| Resistance | 40MΩ |
| Continuity | Yes |
| Diode Test | Yes |
| Indicator Type | LED |
| Voltage Range | 600V AC/DC |
| Power Source | Battery |
| Measurement Functions | Voltage, Current, Resistance, Continuity, Diode Test |
Read and follow safety rules and operating instructions before using the meter.
Defines the maximum input values for various functions of the clamp meter.
Lists physical and performance characteristics of the clamp meter.
Explains the meaning of various safety symbols used on the meter.
Details safety category ratings (CAT II, CAT III, CAT IV) and typical applications.
Identifies and describes the main parts and components of the clamp meter.
Explains the various symbols that can appear on the meter's LCD display.
Describes low battery indicator, high voltage warning, auto power off, HOLD, and AUTO indicators.
Step-by-step guide for measuring AC current using the clamp meter.
Instructions for safely measuring AC voltage with the clamp meter.
Instructions for safely measuring DC voltage with the clamp meter.
Procedure for performing a continuity test using the clamp meter.
Guide on how to measure resistance with the clamp meter.
Steps for testing diodes using the clamp meter.
Instructions on how to replace the batteries in the clamp meter.
Information on accessories, customer service, and meter calibration.
Details FCC compliance, digital emissions, and product registration.
Information on the product's limited warranty and liability.
