To Next PageTo Next Page
Need help?Do you have a question about the Southwire 10031S and is the answer not in the manual?
General| Model | 10031S |
|---|---|
| Brand | Southwire |
| Category | Measuring Instruments |
| Type | Clamp Meter |
| Resistance Measurement | Yes |
| Continuity Test | Yes |
| Display | Digital |
| Battery | 9V |
| Voltage Measurement | AC/DC |
| Jaw Opening | 1.25 inches |
Crucial safety instructions and precautions for using the multimeter.
Specifies the maximum input values for different functions of the multimeter.
Explains common safety symbols used on the multimeter and its accessories.
Details the safety category ratings (CAT II, CAT III) and their typical applications.
Warns about CAT II limitations when insulated tips are removed from probes.
Identifies and describes the controls and indicators on the front of the multimeter.
Identifies and describes the components and features located on the back of the multimeter.
Provides essential instructions for keeping the multimeter clean, dry, and in good working order.
Explains the automatic power-off feature to conserve battery life.
Describes how to use the HOLD button to freeze readings on the display.
Step-by-step guide for measuring AC voltage with the multimeter.
Highlights safety warnings to observe when measuring live voltages.
Step-by-step guide for measuring DC voltage with the multimeter.
Details safety precautions and time limits for 10A DC current measurements.
Step-by-step guide for measuring DC current with the multimeter.
Warns against testing resistance on a live circuit.
Step-by-step guide for measuring resistance with the multimeter.
Warns against testing continuity on a live circuit.
Step-by-step guide for performing a continuity test.
Step-by-step guide for testing 1.5V and 9V batteries.
Warns to remove test leads before battery replacement.
Step-by-step guide for replacing the 9V battery.
How to test a fuse's continuity using the multimeter.
Step-by-step guide for replacing the multimeter fuses.
