To Next PageTo Next Page
Need help?Do you have a question about the Southwire 14060S and is the answer not in the manual?
General| Model | 14060S |
|---|---|
| Manufacturer | Southwire |
| Category | Measuring Instruments |
| Type | Clamp Meter |
| Display | LCD |
| Max Voltage | 600V |
| Max Current | 400A |
| Continuity Test | Yes |
| Battery | 2 x AAA |
| Safety Rating | CAT III 600V |
| AC/DC Voltage Indicator | Yes |
| Measurement Functions | AC Voltage, AC Current, DC Voltage, Resistance, Continuity |
| AC Current Range | 400A |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Overview of the Southwire 14060S multimeter, its functions, and safety warnings.
Maximum voltage and current inputs for various functions of the multimeter.
Details on insulation, enclosure, display, power, and safety compliance.
Explanation of standard symbols used to indicate potential dangers and safety precautions.
Details on measurement categories (CAT II, CAT III, CAT IV) and their typical applications.
Guidelines for test leads and the meter's waterproof and dust-tight IP67 rating.
Care instructions for the meter and FCC compliance information.
Identification and description of the multimeter's buttons, jacks, and rotary function switch.
Explanation of various symbols and indicators shown on the multimeter's LCD display.
Details on using the RANGE, MODE, REL, MAX/MIN, HOLD/Backlight, and Flashlight buttons.
How to perform AC/DC voltage and Frequency/% Duty Cycle measurements.
Procedures for measuring AC/DC current, resistance, and continuity.
Instructions for Diode Test, Capacitance, and Temperature measurements.
Guides for replacing the meter's batteries and fuses, including safety warnings.
Detailed specifications including accuracy, ranges, resolution, and input protection for all functions.
Information on registering the product and the limited warranty terms and conditions.
