Sovereign FD2402 - General Safety and Operation; General Safety (continued); Working with the Device

8
Important - please read these instructions fully
before starting assembly
Safety information
General Safety (continued)
• Only use suitable like-for-like replacement parts
and accessories.
• Do not leave the shredder working unattended and keep
it in a safe, dry place out of children’s reach.
• While being used in the open, connect the shredder to a
residual current (RC) circuit breaker with a trip current of
no more than 30mA.
• When servicing the cutting device, be aware that even
though the power source will not start due to the interlock
feature of the guard, the cutting means can still be moved
by a manual starting mechanism.
• Shut o the power unit before attaching or removing
the bag.
• Keep all guards and deectors in place and in good
working condition.
Working with the device
• Make sure that the funnel feeder is empty before you
start the shredder.
•
Keep your head, hair and body away from the intake opening.
• Do not reach into the funnel feeder during operation.
The shredder will continue to run for a short period after
you switch it o.
• Always make sure you are standing in a rm, balanced
position. Do not lean forwards, and never lean over the
shredder when inserting materials.