9
Important - please read these instructions fully
before starting assembly
Safety information
General Safety (continued)
• Make sure that the material inserted into the shredder
does not contain hard objects made of metal, stone, glass
or similar.
• Do not use the shredder in the rain or in bad weather.
Work in daylight or under good articial lighting conditions.
• Do not operate the shredder when you are tired
or distracted, or under the inuence of alcohol or
medication. Always take a break when you need one and
be sensible about how you work.
• Switch the shredder o and disconnect it from the power
source, under the following circumstances:
- when you are not using the device
- transporting it or leaving it unattended
- before releasing a jammed blade
- when you are checking the device, cleaning it or
removing blockages
- when you are carrying out cleaning or maintenance
work or replacing accessories
- before moving or lifting the shredder
- if foreign objects should enter the shredder, and
it makes unfamiliar noises or vibrations (check the
shredder for damage before starting it up again).
• Do not allow shredded material to accumulate near the
ejection area. This may otherwise hinder proper ejection
and force the material back up through the feeder.
• Do not transport or tip the shredder with the motor running.