Notice
02
Do not place the printer in an environment with heavy vibration or other
unstable factors. Printer shaking will affect printing quality.
Do not place the printer near inflammables and explosives or heat
sources.
Keep the printer in a well-ventilated, cool and dust-free place.
It is suggested to use the materials recommended by manufacturer in
order to avoid machine damage.
Do not use any power cord other than the accompanied one. Use
grounded three-phase power outlet.
Do not wear cotton gloves while operating the printer. This type of
fabric may be wound in the printer’s motion parts, which can cause
burns, personal injury, or printer damage.
Wait for a moment after printing to remove the prints.
It is not recommended to use third-party firmware or motherboard;
otherwise, the warranty will be void.
Clean the printer frequently. Prior to cleaning, turn off the power supply;
use a dry cloth to wipe off dust, adhesive printed plastic or any other
materials from the frame, rail or wheels. Use glass cleaner or isopropyl
alcohol to clean printer surface.
Children below 10 years old shouldn’t use the printer alone.
Do not move the nozzle and printing mechanism with your hands
during printing.
Users shall abide by relevant laws and regulations of the countries and
regions where the printer is placed (used) and professional ethics,
perform safety obligations, and do not use our product or device for any
illegal purpose. In no case shall Sovol bear any legal responsibilities for
anyone breaching laws.
Do not use the printer by any way except as otherwise described
herein to avoid personal injury or property damage.
To Next Page
Loading...
