Soyer BMS-8N - Page 4

4 Operating Instructions Soyer Bolzenschweißtechnik
CONTENTS
7. Description of PS-0K stud welding gun. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
7.1. Technical data for the PS-0K stud welding gun 27
7.2. Cleaning of the stud welding gun 28
8. Description of the PS-1 stud welding gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
8.1. Technical data for the PS-1 stud welding gun 30
8.2. Cleaning of the stud welding gun 31
9. Description of the PS-1K stud welding gun . . . . . . . . . . . . . . . . . . . . . . . . . . 32
9.1. Technical data for the PS-1K stud welding gun 33
9.2. Cleaning of the stud welding gun 34
10. Description of the PS-3K and PS-3K Stativ stud welding guns. . . . . . . . . . 35
10.1. Technical data for the PS-3K (Stativ) stud welding gun 36
10.2. Cleaning of the stud welding gun 37
11. Description of the stud chuck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
11.1. Adjusting adjustable stud chucks 38
11.2. Installing the stud chuck (gun without support) 39
11.3. Installing the stud chuck (gun with support) 41
12. Setup and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
12.1. Requirements for the installation location 43
12.2. Connection of the stud welding device and the stud welding guns 44
12.2.1 Mains connection 44
12.2.2 Connecting the earth cable 44
12.2.3 Connecting the stud welding gun 46
13. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
13.1. Adjusting the charging voltage on the stud welding device 47
13.1.1 Switching the display 48
13.1.2 Adjusting the charging voltage 48
14. Welding operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
14.1. Carrying out welding 49
14.2. Notes on checking the quality of the weld 50
14.2.1 Visual inspection 50