Hardware Setup
SY-5EHM/5EH5 V1.3
6
Chapter 2
HARDWARE SETUP
Congratulations on your purchase of
SY-5EHM/5EH5 V1.3
Super 7
TM
Motherboard. You are about to install and connect your new
Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 Preparations
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1. Pentium compatible processor with CPU cooling fan.
2. DIMM memory module (s)
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. Keyboard
6. Pointing Device (Serial or PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
To Next Page
Loading...
