BIOS Setup Utility
SY-5EHM/5EH5 V1.3
43
3-2.3 System Boot Control Settings
System Boot
Control Settings
Setting Description Note
Disabled
Quick Power On
Self Test
Enabled Provides a fast POTS at
boot-up.
Default
A, C, SCSI
C, A, SCSI
C, CD-ROM, A
CD-ROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
Boot Sequence
LS/ZIP, C
Choose the boot
sequence adapted to
your needs, for example:
[A, C, SCSI] means
the BIOS will look for an
operating system first in
drive A, then in drive C,
and eventually in SCSI
device.
Disabled Default
Swap Floppy
Drive
Enabled Changes the sequence
of A and B drives.
On Puts numeric keypad in
NumLock mode at
boot-up.
DefaultBoot Up
NumLock Status
Off Puts numeric keypad in
arrow key mode at
boot-up.
To Next Page
Loading...
Need help?
General
