SOYO SY-7VBA133U Quick Start Guide

SY-7VBA133U Quick Start Guide
15
Quick Trouble shoot tips
Boot-up Issues
The system do not power-up, no beeping sound heard and the CPU fan does
not turn on.
1. Check if the power cord is plug to the power source.
2. Check if the power is connected to the M/B.
3. Check if the cable of the case power button is connected to the M/B power
button connector (see connectors and plug-ins in the manual for more info).
4. Make sure the power supply is not defective. Change the power supply. The
minimum should be 250 watts.
5. Remove the M/B from the case and test the system. The M/B might be shorted
to the case.
The system power-up, no video, no beeping sound heard, but the CPU fan is
turning.
1. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on
how to clear the CMOS).
2. Check all the jumper settings on the M/B. (if the M/B have any).
3. Check if the CPU is ok by using another CPU (check the Quick start guide for
CPU supported on this M/B).
4. Check if the power supply is ok. The minimum should be 250 watts.
5. Make sure the CPU fan is connected to CPUFAN1 connector.
6. Remove the M/B from the case and test the system. The M/B might be shorted
to the case.
The system power-up, no video, beeping heard.
1. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on
how to clear the CMOS).
2. Check all the jumper settings on the M/B. (if the M/B have any).
3. Check the memory module and the VGA card if inserted properly on the M/B.
4. If yes, change the memory module, it might be defective. Make sure the

SOYO SY-7VBA133U Specifications

General

Brand	SOYO
Model	SY-7VBA133U
Category	Motherboard
Language	English