Battery System Standard and Rating
The SP61065 battery tester will test each battery
according to the selected system and rating.
Use UP/DOWN key to select according to the actual
system standard and rating marked on the battery. See
in the below picture, the arrow indicated location.
CCA: Cold Cranking Amps, specified by SAE&BCI, most
frequently used value for starting battery at 0°F (-18°C).
BCI: Battery Council International standard
CA: Cranking Amps standard, effective starting current value at 0°C
MCA: Marine Cranking Amps standard, effective starting current value at 0°C.
JIS: Japan Industrial Standard, displayed on the battery as combination of the numbers
and letters, e.g. 55D23,80D26.
DIN：German Auto Industry Committee Standard
IEC：Internal Electro Technical Commission Standard
EN： European Automobile Industry Association Standard
SAE: Society of Automotive Engineers Standard
GB：China National Standard
Rating range as following:
Input correct test standard and rating, press Enter key, tester starts to test, and dynamic
interface "TESTING" prompted.
It takes around 5 seconds to display the battery test result.
To Next Page
Loading...
