SP tools SP61065 - Print Data

15
Print time: Year/Month/Day
Print Data
1. Choose the function of Print and press Enter.
2. The Printer will print the test result as below:
3. Press exit button to return the previous menu.
Print Data by PC Printer
If desired you can print the test result data by PC Printer.
Before choosing the print function, it is necessary to connect the tool to the computer via
USB cable.
Once all are available, please kindly insert the CD to the computer
1. Install the USB driver firstly.
2019/02/01 16:14:20
------------------------------------------
Battery Test:
GOOD BATTERY
Charge: 100%
Voltage:12.64V
Health: 96%
Measured: 490CCA
Select Input: CCA
Rated: 500A
Internal R: 6.1mΩ
Cranking Test:
Time: 780ms
Cranking: NORMAL
Cranking Volt: 10.13V
Charging Test
Loaded: 14.16 V
Unloaded: 14.39V
Ripple: 15mV
Charging volt: NORMAL
1. Print Battery
2. Print Cranking
3. Print Charging
4. Print All
Print Data
1. Battery Test
2. Cranking Test
3. Charging Test
4. Review Data
5. Print
6. System Setup
Main Menu