12 | NasalFreshMD
Cleaning and Drying
DO NOT place the NasalFresh MD in a dishwasher or microwave.
DO NOT immerse the Mechanical Module in or rinse with water.
Upper and Lower Tanks. After each nasal wash, dispose of the wastewater in the
Lower Tank. Detach both Tanks from the Mechanical Module and hand-wash with
unscented moisturizer-free antibacterial liquid soap (“Antibacterial Liquid Soap”). To
detach a Tank from the Mechanical Module, grasp the Mechanical Module with one
hand and the Tank with the other and pull the Tank away from the Mechanical Module.
Reverse this procedure to reattach.
Internal Mechanical Module (Self Cleaning). Attach the Self-Cleaning Tool to the
Nasal Pillows on the Hand Control. Fill the Upper Tank with saline and several drops
of Antibacterial Liquid Soap. Switch on the Device and run until the Upper Tank is
empty. Dispose of the wastewater in the Lower Tank.
External Mechanical Module. Wipe the outer surfaces of the Mechanical Module,
Hose and Hand Control with a cloth dampened with liquid soap.
Nasal Pillows. Remove the Nasal Pillows from the Hand Control and wash in hot
water with Antibacterial Liquid Soap.
Drying. Separate the Tanks and Nasal Pillows from the Mechanical Module. Air dry all
parts before storage.
To Next Page
Loading...