NasalFreshMD | 7
Powering On
Turn your NasalFresh MD on by pressing the Power
Button on the Mechanical Module. A green pilot light next
to the ON/OFF Button will come on indicating the Device
is in standby mode and ready to use.
Cleansing Modes
NasalFresh MD has 3 Cleansing Modes - gentle, medium,
and high. When you turn on the Device, the rst of three
blue lights next to the Power Button comes on indicating the Device is in gentle
Cleansing Mode. Pressing the Power Button a second time will cause a second blue
light to come on indicating the Device is in medium Cleansing Mode. Pressing the
Power Button a third time will cause a third blue light to come on indicating the Device
is in high Cleansing Mode.
To Next Page
Loading...