– 31 –
SIM Inverter Monobloc Air-to-Water Heat Pump
Settings > Factory > Passcode ‘’22’’ > Failure
Failure Log Submenu
Press this key to nd the log of the most recent faults the unit has encountered. The fault, the time of the fault and the date of the fault
will all be recorded and displayed. The log is capable of holding the most recent 35 faults. The fault log can be cleared by pressing
the “Clear” button in the upper right hand corner and then entering in the correct password. The password changes everyday with
the day of the month (see instructions how to set up time and date). Example: if the date is 1/5/21 the password will be “5”. Press
Yes to continue/verify to clear the log.
To Next Page
Loading...
