Need help?Do you have a question about the Spaceman 6210-60Hz and is the answer not in the manual?
General| Brand | Spaceman |
|---|---|
| Model | 6210-60Hz |
| Category | Ice Cream Maker |
| Language | English |
Introduction to the Spaceman soft serve machine, its features, and manual scope for NON-HEAT TREAT models.
Explanation of warning, caution, important, note, and green box icons used throughout the manual.
Instructions for safely removing the machine from its packaging and placing it in its final location.
Procedure to inspect the machine for any shipping damage and contact Spaceman Technical Service.
Steps for unpacking all parts and accessories, organizing them, and inspecting for damage.
Overview of installation steps: unpacking, placement in food prep area, and understanding procedures.
Steps for disassembling, cleaning, lubricating, and sanitizing the machine parts before operation.
Basic steps for operation: preparing product, adding to hoppers, and initiating the freeze cycle.
Diagram and labels identifying the key components of the Spaceman machine.
Illustrations and descriptions of various beater types and optional parts for the machine.
Guidelines for placing the machine on a level surface, ensuring proper clearance and ventilation.
Information on using specified refrigerants and contacting support for alternatives.
Instructions for connecting the machine to the power supply and verifying wiring.
Daily, monthly, and quarterly maintenance tasks recommended by Spaceman for optimal performance.
Detailed steps for disassembling machine parts, including air pumps and dispensing door components.
Instructions for hand-washing all machine parts, including cylinders, gaskets, and O-rings.
Step-by-step guide for reassembling beater assemblies, dispensing door, and air pumps.
Procedure for sanitizing the machine and its parts using a food-grade, no-rinse sanitizer.
Overview of the control panel, display screen, mix low indicator, and touch switch panel.
Instructions for initiating the freeze mode, managing product, and adjusting overrun settings.
Step-by-step guide for adding product to the hoppers, including handling air pumps.
How to dispense product using draw handles and adjusting dispensing speed.
Instructions for using the quick refreeze function to cool product down to serving consistency.
Procedure for resetting the machine in case of issues or freeze-ups.
Guides for operating the machine in Wash, Standby, and Defrost modes.
Instructions for adjusting product consistency, hopper temperature, and date/time settings.
Probable causes and remedies for low temperature protection errors.
Probable causes and remedies for motor overload errors.
Probable causes and remedies for machine protection errors.
Probable causes and remedies for temperature sensor errors.
Probable causes and remedies for motor amp errors.
Probable causes and remedies for insufficient hopper cooling.
Probable causes and remedies for hopper freezing issues.
Probable causes and remedies for excessive product leakage into the internal drip tray.
Probable causes and remedies for excessive product leakage from the dispensing door spout.
Probable causes and remedies for automatic machine shutdown.
Probable causes and remedies for product being too soft.
Probable causes and remedies for unusual noises from the machine.
Diagrams and bill of material for O-rings and seals used in the dispensing door and optional parts.
Table listing viscosity ranges for various Spaceman machine models.
General notes or important information related to the manual's content.
To Next Page