Seaich Corporation, LLC. All rights reserved. www.seaich.com
|
Spacerails, LLC. www.spacerails.com Page 19
Inner LoopSteep Height
[ Click ]
Install rails at an angle for the best speed and
smoothest traveling.
Join rails together with Rail Couplings if a
segment of rail is cut too short and needs to be
extended.
Keep rails stable by attaching Rail Clips for any
rail segments that need additional support.
Inner Loop
The track needs a steep incline to gain speed to
travel through the loops smoothly.
While creating multiple loops, keep the outer
loop larger than the inner loop.
RAIL TIPS CONTINUEDR
To ensure stability of the rails, you should hear a
click when the rail is securely in place.
Install the rails by pressing the rails rmly into
each side of the arm.
Loops should be as close to perfect circles as
possible to run most eectively.
To Next Page
Loading...
