19
P09588, Rev. 6 CO # 1848
SPECIFICATIONS
COVER: Bacteriostatic, flame resistant, fluid-proof, tear resistant
FOAM: High-density open-cell polyurethane. “THIS PRODUCT MEETS
THE REQUIREMENTS OF BUREAU OF ELECTRONIC AND
APPLIANCE REPAIR, HOME FURNISHINGS AND THERMAL
INSULATION TECHNICAL BULLETIN 117-013.”
AIR CYLINDERS: Urethane (main cylinders), and urethane-coated nylon
(reservoirs)
CONTROL UNIT Model No.: 6500
Dimensions: 14.5 x 10 x 5 inches (37 x 25 x 13 cm)
Weight: 9.5 lbs (4.2 kg)
6500 Rated Spec: AC 110-120V / 60Hz / 0.2A MAX
Fuse Rating: 1A 250VAC
Comfort level pressure range:0.66~1.06 +/- 0.05 psi
Auto firm function pressure range:1.35 +/- 0.05psi
Classification: Type BF/ Class I
Not AP or APG equipment
STANDARD
SURFACE SIZES: 80”L X 36”W
84”L X 36”W
75”L X 36”W
MATTRESS HEIGHT: 7” for all models
WEIGHT LIMIT 500 lbs. non-powered mode
350 lbs. powered modes
CYCLE TIME: 15 minutes
PLACEMENT: Models available for placement on typical hospital/medical
facility flat or recessed deck bed frames.
WARRANTY: Control unit: 24 months, not pro-rated, against manufacturing
defects.
Mattress: 5 years, not pro-rated, against manufacturing defects.
FLAMMABILITY: All models comply with 2000 NFPA 101 (Life Safety Code), Cal. TB
# 129 and 16 CFR 1632 and 1633.
To Next Page
Loading...
