EasyManua.ls Logo

SPAN F500S - User Manual

SPAN F500S
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Model: F500S
SIT-TO-STAND PATIENT LIFT
Ensure the product has been assembled according to the instructions in this manual.
All operators should read and understand the instructions for safe and proper operation of the
patient lift.
P11584

Questions and Answers

  • J
    Joseph CookAug 4, 2025
    What to do if my SPAN F500S Medical Equipment lift will not operate even though it shows the batteries are charged?
    • S
      Stacy RiceAug 4, 2025
      If your SPAN Medical Equipment lift won't operate despite showing a full battery charge, first, unplug the AC power cord from the control box, as the lift is designed not to function when connected to AC power. Then, verify that the hand control and actuator plugs are fully and correctly inserted into the control box port. If the issue persists, the hand control may need replacement, as it could be at the end of its life cycle.
  • R
    Raymond FrostAug 11, 2025
    Why does the actuator stop and start while lifting or lowering SPAN F500S?
    • E
      Eric BlackAug 11, 2025
      If the actuator in your SPAN Medical Equipment stops and starts while lifting or lowering, it may be time to replace the batteries or battery pack, as they are likely at the end of their life cycle.
  • E
    Emily ToddAug 19, 2025
    What to do if the actuator only goes up or down in SPAN F500S?
    • D
      Daniel FreemanSep 12, 2025
      If the actuator on your SPAN Medical Equipment only goes up or down, but not both, the hand control may be at the end of its life cycle and needs replacement. Alternatively, the control box may be malfunctioning.
  • B
    Bobby McdonaldAug 27, 2025
    Why is there a grinding sound inside the actuator when lifting SPAN Medical Equipment?
    • J
      Jill OliverAug 27, 2025
      If you hear a grinding sound inside the actuator when lifting your SPAN Medical Equipment, it indicates that the internal gears are likely stripped. The suggested solution is to replace the actuator.

Summary

Owners Manual Title

Model and Type

Identifies the specific model and function of the patient lift.

Pre-Use Instructions

Crucial steps to ensure safe operation before using the lift.

Merchandise Inspection

Definitions and Symbols

Safety Instructions

Important Operational Notes

Key considerations for safe operation and patient handling.

Critical Warnings

Features and Overview

Included Tools

Lists the tools provided for assembly and maintenance.

Component Identification and Weights

Identifies lift components and their respective weights.

Lift Dimensions

Specifications and Options

Control Unit Specifications

Details electrical and operational specifications of the control unit.

Additional Lift Specifications

Lists further dimensions, weight, and turning diameter.

Standard Features

Lists the standard components and features of the lift.

Optional Features

Lists available optional accessories for the lift.

Control Box and Actuator Overview

Installation Guide

Install Base and Mast

Instructions for assembling the base and mast sections of the lift.

Attach Boom

Steps for connecting the boom to the main structure.

Install Footplate

Instructions for attaching the footplate to the lift base.

Install Actuator

Steps for connecting the actuator assembly.

Install Knee Pad

Instructions for fitting the knee pad assembly.

Install Power Control Unit

Steps for mounting the main power control unit.

Power Control Unit Details

Charger Cord Safety Warning

Operating Instructions

Recommended Operating Conditions

Specifies environmental conditions for optimal lift performance.

Preparation Before Lifting

Essential steps to take before commencing any patient lift.

LCD Display Panel Signs

Charging Procedures

LCD Display Panel Charging Signs

Using the Hand Control

Using the LCD Display Panel

Battery Low Warning

Overload Warning

Critical Battery Charge Warning

Compatible Slings

Sling Usage Precautions

Fitting the Stand Assist Sling

Sling Loop Options

Explains different loop positions for various patient postures.

Fitting the Buttock Strap

Fitting the Knee Belt

Lift and Transfer from Bed

Lifting Hints and Tips

Provides helpful advice for performing lifts safely and effectively.

Maintenance and Inspection Schedule

Cleaning and Disinfection Procedures

Troubleshooting Guide

Emergency Lowering Mechanism

Warranty Policy

Return Goods Policy

SPAN F500S Specifications

General IconGeneral
ModelF500S
TypeFetal and Maternal Monitor
Power SupplyAC 100-240V, 50/60Hz
Weight3.5 kg
ConnectivityUSB
ParametersFetal Heart Rate, Uterine Activity

Related product manuals