3
P09588, Rev. 6 CO # 1848
INTRODUCTION
PressureGuard
Custom Care
Convertible
Non-powered therapy surface with add-on powered control unit
Introduction
The Custom Care
®
Convertible is a non-powered treatment surface featuring a patented air therapy
design that automatically adjusts a network of interconnected air cylinders and elasticized
reservoirs to the appropriate, therapeutic level, regardless of the user’s weight or position. It is
intended for use as a non-powered reactive therapy surface, or as a powered active therapy surface
via the addition of a powered air control unit.
DESCRIPTION: The system consists of a foam shell with a high-density, zoned foam topper
serving as the support surface underneath the patient. The foam shell also includes contoured
foam bolsters at the sides and ends of the mattress, providing added patient stability and
positioning. The system also includes the unique Heel Slope
®
feature, designed to further reduce
pressure for the sensitive heel area. Within the foam shell is housed the inflation system,
consisting of air cylinders which run lengthwise within the mattress. The optional, add-on
powered control unit connects to the mattress at the patient foot-end and provides alternating
pressure and rotation therapy modes. The system also includes an auto firm mode to provide a
firm support surface to use while providing patient care and to assist in patient transfer. A
disconnect feature resets the inflation level back to an ideal therapeutic setting for use of the
support surface without the control unit.
INDICATIONS FOR USE: Custom Care
®
Convertible models are intended for the prevention and
treatment of pressure ulcers. Powered modes are intended for active wound treatment, and may
be indicated for use as a preventive tool against further complications associated with critically
ill patients or immobility.
Contraindication: The PressureGuard Custom Care Convertible™ is not for use by
those with unstable spinal cords. Patient injury could occur.
WARNING - To reduce the risk of burns, electrocution, fire or
injury to persons: READ ALL INSTRUCTIONS BEFORE USING THIS
UNIT.
1. Use this unit only for its intended use and with recognized accessories which are described
in the operating instructions; use of other accessories or materials may degrade minimum
safety level.
2. Never operate the product’s powered control unit if it has a damaged cord or plug, is not
working properly, has been dropped or damaged, or has been exposed to water. Return the
unit to Span-America Medical Systems, Inc. for examination and repair.
3. Keep the cord away from heated surfaces. Discontinue use if power cord is damaged or
worn.
4. Never drop or insert any object into any opening or hose. Keep away from sharp objects.
5. Do not use outdoors.
To Next Page
Loading...
