Inside the Simon Says Through-Hole kit, you'll find all the parts for the Simon Says. This includes:
ATmega328 - pre-programmed with Simon firmware
Buzzer
0.1μF Cap (x2)
10K Resistor
LEDs (x4) (blue, yellow, red, green)
Slide Switch (x2)
Battery Clips (x4)
AA Batteries (x2)
Button pad
Bezel
Standoffs and screws (x4)
Simon Says - Through-Hole PCB
Soldering Iron Stand
TOL-09477
SparkFun Safety Glasses
SWG-11046
Diagonal Cutters
TOL-08794