sparkfun Simon Says User Manual

Now that you’ve successfully got your Simon Says up and running, it’s time to incorporate it into your own project!
Arduino IDE
This ATmega328P comes pre-programmed with the Simon code as well as the STK500 serial bootloader. This
serial bootloader will allow you to re-program the Simon game using the Arduino IDE. Selecting the “LilyPad
Arduino w/ ATMega328” bootloader that was burned to the Atmega328P chip allows the Simon to be re-
programmed to do many different things! You can write code to change your Simon into a new unique project. Try
browsing our GitHub repository containing the default example code and additional examples:
SIMON SAYS GITHUB REPOSITORY
Parts to Upload Code
To upload new code to the board, we require additional components that are not included in the kit.
To learn how to use the Simon Says with the Arduino IDE, we have a few tutorials. To get started, it is
recommended to start with this tutorial:
SparkFun FTDI Basic Breakout - 3.3V
 DEV-09873
Break Away Headers - Straight
 PRT-00116
SparkFun USB Mini-B Cable - 6 Foot
 CAB-11301

sparkfun Simon Says Specifications

General

Brand	sparkfun
Model	Simon Says
Category	Motherboard
Language	English