Plumbing Flow Pattern for Power Drain:
Rubber Coupling
Whirlpool Jet OverFlow
Hot and cold water supply lines
Before water line connections, please follow below:
Determine if your spa chair is used for a new construction of a salon or a replacement spa chair.
1. New construction: Make sure to remove any and all debris and/or dust from current hot cold
water pipes before hooking up to spa. Suggested direction to remove debris: turn on water and
drain into a bucket or container.
2. Replacement Spa: Always use new hot/cold water hoses when connecting a new spa chair to
prevent debris, such as old rubber particles, from clogging drain.
*** Vaccum Breaker
Due to Town and/or State requirement/s are varies in building code, if the Town and /or
State requires Vaccum Breaker, As the Plumber MUST provide Vaccum Breaker according
to building code requirement.
10 | User Manual Spatech
To Next Page
Loading...