22
BATERY CHARGING
The player has an internal battery. You have to charge it
before starting to use it:
Switch on the player moving the ON/OFF switch (11) down
to ON position, A USB cable is supplied with the player.
With the computer turned on, connect one end of the cable
to your computer’s USB port and the other end to the
player’s connector (10).
• The battery will start charging. Charge the battery for 3-4
hours to ensure a maximum usage time and to lengthen
its useful life.
• The drivers will be installed automatically if you are using
one of the following operating systems: Windows 10 / 8 /
7 / Vista / XP, MAC, Linux.
NOTE: To charge the player correctly, connect the USB cable
directly to your computer’s USB port (not via a hub). Remember
that you should charge the device before the rst use when the
battery icon is empty.
To Next Page
Loading...
