Need help?Do you have a question about the Speck Badu Stream II and is the answer not in the manual?
General| Head | 1.5 m |
|---|---|
| Material | Plastic |
| Max Flow Rate | 600 L/h |
| Max Head | 1.5 m |
| Power Consumption | 18 W |
| Voltage | 230 V |
| Weight | 0.6 kg |
Specific warnings for installers and users of the swim jet fitting regarding location, condition, and usage.
Detailed warnings and illustrations regarding entrapment hazards in pools and spas, including suction outlets.
Guidelines on maximum water velocity through drain covers and adherence to local regulations.
Details on the Virginia Graeme Baker Pool and Spa Safety Act requirements for pools and spas.
Critical warnings about electrical hazards associated with pool pumps and proper installation by professionals.
Introduction to the BaduStream II, its components like anti-entrapment cover, and air regulator.
Instructions on turning the system on/off and adjusting water and air flow using nozzles and knobs.
Guidance on initial swimming technique, finding balance, and maintaining a consistent workout pace.
Steps and considerations for priming the self-priming BaduStream II pump, including filling the pump body.
Procedures for testing the Ground Fault Circuit Interrupter (GFCI) on the control box before each use.
Instructions on how to set the swim jet nozzles for optimal swimming performance and water break.
Recommendations for protecting the equipment during freezing water temperatures using a winter cover kit.
Tips for users who find themselves swimming too easily, and suggestions for children's use and water effect.
Explanation of self-priming pumps, why they need priming, and general maintenance requirements.
Details on pump amperage, breaker sizes, automated controls, and filter system integration.
Advice on swimming against the current, staying in the swim lane, and pool wall proximity.
Possible causes and solutions for the pump failing to prime or the motor not turning.
Diagnosing and resolving issues related to motor noise, overheating, and noisy pump operation.
Troubleshooting motor overload protection, control box, and air button functionality.
Solutions for cracked plastic covers and stuck massage hoses.
A visual representation of the BaduStream II components with part identification.
Detailed list of all parts for the BaduStream II and available optional components.
Outlines the personal, non-transferable warranty period, coverage, and buyer obligations.
Details what is not covered by the warranty, including damage, misuse, and unauthorized repairs.
Specifies limitations on liability for damages and outlines buyer's legal rights.
Procedures for obtaining RMA for product returns and shipping instructions.
To Next Page
