Speco D1BD - Admin Page Settings; Accessing Admin Page for Settings

D1BD User’s Guide
Rev. 1.0 (Dec 6, 2013)
17
4. Additional settings through connection to the Admin Page
All the parameters of product follows factory default values. For more sophisticated target application it is
needed to change parameters. The admin page can be connected through
”http://IP_address:HTTP_port_number”/admin.htm
It is needed to enter ID and password of the administrator. Default ID and password are admin,1234. It is highly
recommended to change the ID and password to prevent illegal access to the unit. For more detailed
information regarding of the Admin Page, please refer to the [Configuration_Guide].