D1BD User’s Guide
Rev. 1.0 (Dec 6, 2013)
2
Directions
ONSIP D1BD is designed for indoor use only. When using ONSIP D1BD in an outdoor or equivalent
environment, you must use a water-resistant housing for the installation.
Be careful not to cause any physical damage by dropping or throwing the ONSIP D1BD. Especially keep
the device out of reach from children.
Do not disassemble ONSIP D1BD. You will void the warranty when disassembled.
Use only 12VDC power adapters.
If you would like to use the ONSIP D1BD for security, monitoring, please check the legal regulations within
the country.
To Next Page
Loading...