Why is the image on my Speco HTINT70T Security Camera screen dim?
If the image on your Speco Security Camera screen is dim, try the following: * Clean the lens or glass with a soft, clean cloth if they are dirty. * Adjust the monitor controls. * Change the camera position if it's facing a very strong light. * Adjust the lens focus.
What to do if the image on my Speco HTINT70T flickers?
If the image on your Speco Security Camera screen flickers, ensure the camera isn’t facing direct sunlight or fluorescent lighting. If needed, change the camera's position.
What to do if the image on my Speco HTINT70T Security Camera is dark?
If the image on your Speco Security Camera screen is dark, adjust the contrast control of the monitor. Also, if there is an intermediate device, correctly set the 75?/Hi-z.
How to fix the color of the picture on Speco Security Camera?
If the color of the picture on your Speco Security Camera is not correct, check the settings in the WHITE BALANCE menu.
Why is my Speco HTINT70T not working and hot?
If your Speco Security Camera is not working properly and the surface is hot, check that the camera is correctly connected to an appropriate regulated power source.
How to troubleshoot a Speco HTINT70T Security Camera with no display?
If nothing appears on the screen of your Speco Security Camera, check the power cable, power supply output, and video connection between the camera and monitor.
Why does INTENSIFY not work on my Speco HTINT70T?
To resolve the issue of INTENSIFY not working on your Speco Security Camera, verify that the AGC setting in the EXPOSURE menu is not set to OFF. Also, check the EXPOSURE menu and make sure SHUTTER is properly set.
How to troubleshoot a Speco Security Camera when nothing appears on the screen?
If nothing appears on the screen of your Speco Security Camera, check the power cable, the power supply output, and the video connection between the camera and the monitor to ensure they are properly connected and functioning.
What to do if the image on my Speco HTINT70T screen is dark?
If the image on the screen of your Speco Security Camera is dark, try adjusting the contrast control on your monitor.
Why is my Speco HTINT70T Security Camera hot and not working properly?
If your Speco Security Camera isn't working correctly and its surface is hot, verify that it's properly connected to an appropriate regulated power source.
General| Image Sensor | 1/2.8" CMOS |
|---|---|
| IR LED | Yes |
| Onvif Support | Yes |
| Weather Resistance / Ingress Protection | IP67 |
| Effective Pixels | 2.07MP |
| Resolution | 1920x1080 |
| Lens | 2.8mm |
| Night Vision / IR Distance | Up to 30m (98ft) |
| Day/Night | Yes |
| Wide Dynamic Range | Digital WDR |
| Video Compression | H.265/H.264 |
| Bit Rate | 32 Kbps to 8 Mbps |
| Network Interface | 10/100Mbps Ethernet |
| Protocols | TCP/IP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, SNMP, QoS, Bonjour, 802.1x |
| Power Supply | 12VDC or PoE (802.3af) |
| Power Consumption | 5W |
| Operating Temperature | -40°F ~ +140°F |
To Next Page
