To Next Page
F
fergusonmeganSep 12, 2025
How to fix incorrect color on Speco Security Camera?
- Kkevin45Sep 12, 2025
If the color of the picture from your Speco Security Camera is incorrect, check the settings in the WHITE BALANCE menu.
How to fix incorrect color on Speco Security Camera?
If the color of the picture from your Speco Security Camera is incorrect, check the settings in the WHITE BALANCE menu.
What causes image flickering on a Speco HTINT70T?
If the image on your Speco Security Camera flickers, ensure the camera isn’t pointed at direct sunlight or fluorescent lighting. If it is, change the camera position.
Why does the INTENSIFY function not work on my Speco HTINT70T?
If the INTENSIFY function isn't working on your Speco Security Camera, ensure that the AGC setting in the EXPOSURE menu is not set to OFF. Also, check the EXPOSURE menu and make sure SHUTTER is properly set.
General| Image Sensor | 1/2.8" CMOS |
|---|---|
| IR LED | Yes |
| Onvif Support | Yes |
| Weather Resistance / Ingress Protection | IP67 |
| Effective Pixels | 2.07MP |
| Resolution | 1920x1080 |
| Lens | 2.8mm |
| Night Vision / IR Distance | Up to 30m (98ft) |
| Day/Night | Yes |
| Wide Dynamic Range | Digital WDR |
| Video Compression | H.265/H.264 |
| Bit Rate | 32 Kbps to 8 Mbps |
| Network Interface | 10/100Mbps Ethernet |
| Protocols | TCP/IP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, SNMP, QoS, Bonjour, 802.1x |
| Power Supply | 12VDC or PoE (802.3af) |
| Power Consumption | 5W |
| Operating Temperature | -40°F ~ +140°F |
