Pairing the remote control with the transmitter
First, make sure the transmitter and the remote control are turned off. Then press and hold the Manual
button and turn on the transmitter. During the next 4 seconds repeat the same steps on the remote control.
The Laser beeps and the remote’s display show Pairing OK for one second and then the same function
as the laser is actually working to indicate the transmitter has been matched with the
remote control.
RC402N Menu Functions
Press and release M button at the Standard Display to enter the MENU.
The actual available function will be marked in arrow brackets >> <<.
A down arrow at the the right site indicates that the user can scroll down through the menu using the down
arrow button.
After going to the next menu row, an up/down arrow at the the right site indicates that the user can scroll
up/down through the menu using the Up/Down arrows buttons.
Pressing and releasing button M changes the unit always back to the standard or previous display.
Press and release the Up/Down buttons until the desired function at the selected menu row is marked.
Press and release button E to open the submenu OR start the selected function.
Menu functions for the LL300S
Rotation
Press and release the M button at the Standard Display and select >>Rotation<<.
Press and release button E to display the actual rotation speed.
18
To Next Page
Loading...
Need help?
General
