Spectra (1641) 3
English
The 1641 LCD Keypad includes a programmable 32-character LCD
screen, zone input and a PGM output, as well as supporting the use
of the Paradox Memory Key. All of the LCD keypad’s features and
options can only be accessed through the keypad’s programming
mode. During the keypad’s power up, press and hold the [
CLEAR] key
to set the LCD screen and the Keypad Code to default.
[1] Labels
This feature allows you to program some of the messages that appear
on the keypad’s LCD screen. In step 3 of “Entering Keypad
Programming Mode” described in the shaded box above, select
option [1]. The keypad will prompt you to enter a 3-digit section. Each
section from [101] to [135] represents a specific message. Enter the
3-digit section that corresponds to the message you wish to change.
Entering Keypad Programming Mode
STEP 1: Press and hold the [0] key for two seconds.
STEP 2: Enter the [
KEYPAD CODE]. Default: 000000
STEP 3: Press the key corresponding to the desired option or use the arrow keys to
scroll through the available options and press [
ENTER].
[1] = Labels [4] = Keypad PGM
[2] = Options [5] = Read Key
[3] = Keypad Code [6] = Write Key
[101] TEXT [UC]
ZONE ONE
Indicates current character style. Press
the
[FNC2] key to change:
[UC] = Upper Case
[LC] = Lower Case
[SP] = Special
Cursor indicates the selected character. Press the
[T] or [S] keys to
scroll the characters. Press the numerical keys from [0] to [9] to
replace the selected character. Refer to “Character Sets” on page 24.
_
To Next Page
Loading...