To Next PageTo Next Page
Need help?Do you have a question about the Spectra LL300N and is the answer not in the manual?
General| Rotation speed | 600 rpm |
|---|---|
| Environmental rating | IP66 |
| Warranty | 5 years |
| Accuracy | ±2.2 mm at 30 m (±3/32 in at 100 ft) |
| Range | Diameter 2600 ft (800 m) with HL760 receiver |
| Self-leveling range | ±5 degrees |
| Laser type | 635 nm, Class 2 |
| Power source | 4 x D-cell alkaline |
| Battery life | Up to 90 hours with alkaline batteries |
| Operating temperature | -20°C to 50°C (-4°F to 122°F) |
| Outdoor use | Yes |
Basic application for managing elevation across job sites.
Verification and adjustment of heights on smaller construction projects.
Ensuring horizontal accuracy for concrete forms and foundations.
Calculating earthwork volumes for excavation and backfill.
Managing depth and grade during digging operations.
Creating consistent inclines for access routes like driveways and ramps.
Device automatically adjusts to a level position for ease of use.
Specifies the precision of the laser measurement: ±3/32 in @ 100 ft.
Defines the maximum operational distance of the laser: 1,650 ft diameter.
Easy activation with a single button for rapid deployment.
Prevents inaccurate measurements by stopping rotation if disturbed.
Allows manual setting of slopes on one axis using the remote control.
All necessary accessories are included in a single, portable case.
Built for ruggedness and ease of transport on job sites.
Offers an extended warranty period for peace of mind: 5 Years.
All system parts are contained in a single case for convenience.
Designed for user convenience in transport, carrying, and storage.
Optimized power consumption for extended operational periods.
Robust construction withstands accidental drops up to 3 feet onto concrete.
Remote functionality expands the range of possible slope applications.
Details the laser type, wavelength, class, and power output.
Specifies the precise measurement tolerance of the laser: ±3/32 in at 100 ft.
Outlines the maximum effective working distance of the laser: 1,650 ft diameter.
Indicates the maximum angle the laser can automatically compensate for: ±5 degrees.
Describes the technology used for automatic leveling: Electronic self-leveling.
Specifies the maximum height from which the unit can be dropped onto concrete: 3 ft.
Allows manual slope setting on one axis while the other remains self-leveled.
Alerts users when the unit is out of its self-leveling range.
Details the type and quantity of batteries required for operation.
Provides information on expected battery run times for different battery types.
Indicates battery status via a flashing red light.
Specifies the rotational speed of the laser beam.
Details the standard tripod mount thread size: 5/8" x 11.
Specifies the temperature range for optimal laser operation.
Specifies the temperature range for safe storage of the unit.
Indicates the unit's protection rating against water and dust ingress.
Provides the overall size of the laser unit in inches and centimeters.
States the total weight of the laser unit in pounds and kilograms.
Specifies the warranty period for the LL300N laser level: 5 Years.
Specifies the units available for digital measurements: mm, ft, in, frac.
Defines the height range for receiving the laser signal: 4 inches.
Lists the three sensitivity settings for achieving on-grade.
Provides expected battery run time for the receiver: 70+ hours.
Device automatically powers off after 30 minutes of inactivity.
Specifies the temperature range for optimal receiver operation.
Indicates the receiver's resistance to dust and water ingress (IP67).
States the weight of the receiver unit without its clamp.
Specifies warranty periods: 3 Years, 2 Years 'No Excuses'.
