EasyManua.ls Logo

Spectra HV302 User Manual

Spectra HV302
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Question and Answer IconNeed help?

Do you have a question about the Spectra HV302 and is the answer not in the manual?

Spectra HV302 Specifications

General IconGeneral
TypeRotary Laser Level
Laser ColorRed
Laser Diode635 nm
Laser ClassClass 2
Self-Leveling Range±5 degrees
Waterproof/DustproofYes
IP RatingIP66
Range/Operating Diameter2, 600 ft (800 m) diameter with HL760 receiver
Power SourceNiMH rechargeable battery pack or alkaline batteries
Operating Temperature-20°C to 50°C (-4°F to 122°F)
Rotation Speed300, 600 RPM
Accuracy±3/32" @ 100 ft (±2.2 mm @ 30 m)

Summary

Introduction and Safety

For Your Safety

Safety instructions and warnings for hazardless and safe operation of the laser device.

HV302 Components Overview

Laser Powering and Battery Management

Powering the HV302

Details on powering the laser using rechargeable NiMH battery packs and alkaline batteries.

Battery Warnings and Handling

Safety warnings and proper handling procedures for NiMH and alkaline batteries.

Installing and Replacing Batteries

Installing HV302 Batteries

Step-by-step guide for installing NiMH battery packs and alkaline batteries into the HV302 unit.

Battery Recharging Procedures

Recharging Rechargeable Batteries

Information on recharging rechargeable batteries and charging conditions, including LED indications.

Laser Setup and Operation

Initial Laser Setup

Procedures for positioning the laser horizontally or vertically and allowing it to level.

Turning the Laser On/Off

Instructions on how to turn the laser on, monitor self-leveling, and turn it off.

Standard Laser Features

Advanced Laser Modes (Part 1)

Measurement and Vertical Application

Determining Height of Instrument (HI)

Method to calculate the height of the laser beam using a benchmark and grade rod.

Y-Axis Slope Mode Operation

HL760 Receiver Operations

Pairing HL760 Receiver with Transmitter

Step-by-step guide to pair the HL760 receiver with the laser transmitter.

RC402N Remote Control Introduction

RC402N Remote Control Power and Basic Operation

RC402N Remote Control Pairing and Menu

Pairing Remote Control with Transmitter

Procedure to pair the RC402N remote control with the laser transmitter for communication.

RC402N Control of Laser Functions

Automatic Grade Match

Activating and Using Grade Match

Steps to activate and use the Grade Match mode for connecting elevation points.

Automatic PlaneLok Functionality

Vertical Setup Modes

Setting Menu Options (Part 2)

Troubleshooting Guide

Error Code Resolution

Table of error codes, their descriptions, and recommended solutions for troubleshooting.

Calibration Procedures

Y and X Axis Calibration Check

Steps to check the calibration accuracy of the Y and X axes using a wall and distance.

Z (Vertical) Axis Calibration Check

Method to check the vertical calibration using a plumb bob and receiver.

Warranty Information

HV302 Product Warranty Details

Information about the Trimble warranty for the HV302, including coverage and exclusions.

Technical Data - Laser Unit

Related product manuals