SpectraLink 7502 - Page 73

Spectralink 7502 Handset User Guide
Spectralink 7502 Handset User Guide.docx
April 2023 73
4. Scroll to Economy mode, and press Select.
5. Press Change to select between On or Off.
Login (Subscription)
Before you can use the registered handset, it is necessary to subscribe the handset to a
system (login). The handset can be subscribed to up to 15 different systems.
Selecting a Login
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Login, and press Select.
5. Scroll to Select Login, and press Select.
6. Scroll to the desired login, and press Select.
Removing a Login
Logins can be removed from the system in use and from the 14 other systems (if
connected). A password is required to remove a login. The default password is factory set at
0000.
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Login, and press Select.
5. Scroll to Remove login, and press Select.
6. Scroll to the desired login, and press Select.
7. Enter your password, and press Ok.
8. If the system in use is removed, it is necessary to select one of the remaining
systems or to subscribe to a new one.
Creating a Login (Subscription)
To create a login, the system must allow subscriptions to be made. Some systems also
require an Authentication Code (AC). You can create a login by entering the ARI of the
system directly/manually or by performing a search for a system. If more than one system