14215700-IG, Edition 15.0
May 2020, Original document
317
Configuring Handset Login
Enable/Disable Handset Login on Spectralink IP-DECT/Virtual IP-DECT Server
1. Ensure that support of the relevant call handler is enabled (Configuration > relevant Call
handler (e.g. Skype for Business)).
2. Click Configuration, and then click Wireless Server.
3. On the Wireless Server Configuration page, under Handsets, enable the handset sharing
features Handset sharing and Handset login:
Field
Wireless Server Configuration - DECT
Subscription allowed (Optional) If enabled, it is possible to subscribe new handsets to
the system.
Note: Subscription will be disallowed after 120
seconds or when a subscription succeeds. If more
time is needed or more handsets must be subscribed,
it is necessary to disable the parameter Auto-
matically disable subscription allowed below.
Automatically disable subscription
allowed (Optional)
If enabled, subscriptions will automatically be dis-
allowed after 120 seconds or when a subscription suc-
ceeds.
If disabled, subscriptions will be allowed until explicitly
disabled.
Default value: Enabled
Note: This feature is part of DECT Security Step A.
Authenticate calls (Optional) If enabled, each individual DECT call will be authen-
ticated.
Encrypt voice/data (Optional) Encryption of voice/data packets transmitted via
DECT.
Possible values: Disabled, Enabled or Required.
Default value: Required
Note: Repeaters do not support encryption. If set to
Required, the call is ended when handover is estab-
lished on the repeater.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
