SpectraLink IP-DECT Server 200 - Page 351

14215700-IG, Edition 15.0
May 2020, Original document
351
SYSTEM ARCHITECTURE
l The Spectralink IP-DECT Server 400 is both a radio unit and a SIP integration unit to the host
SIP Call Control / UC platform. Additionally, it controls and handles the Spectralink IP-DECT
Base Stations.
l Single-cell configuration:
1 x Spectralink IP-DECT Server 400 and up to 3 x Spectralink DECT Repeaters (2 or 4 chan-
nel multi-cell)
12 wireless users/six simultaneous calls
Optional 60 users *
Note:
* The Spectralink IP-DECT Server 400 does have 12 channels, but is limited to 6
channels in basic version.
l Multi-cell configuration:
1 x Spectralink IP-DECT Server 400, up to 9 x Spectralink IP-DECT Base Stations and up to
3 x Spectralink DECT Repeaters (2 or 4 channel multi-cell) connected on each Spectralink IP-
DECT Server or Spectralink IP-DECT Base Station **.
12 wireless users/six simultaneous calls
Optional 60 users/24 simultaneous calls
Note:
* * The Spectralink IP-DECT Base Station does have 12 channels, but only 11 can
be used when synchronizing over the air.
SUPPORTED CODECS
l G.711 A-law and µ-law
l G.726 (32 kbps - 4 bit ADPCM)
l G.729
NETWORK
l 10/100 Mbps Ethernet port
l Manual or dynamic host configuration protocol (DHCP)
l Time and date synchronization using Network Time Protocol (NTP)
l LED status indication
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide