14205603-IG, Edition 11.0
May 2020, Original document
4
About This Guide
This guide describes how to configure a Spectralink IP-DECT Server 200/400/6500, Spectralink Vir-
tual IP-DECT Server One and Spectralink DECT Server 2500/8000 for connecting to a Cisco Uni-
fied Communications Manager.
In the following the servers will be referred to as “Spectralink IP-DECT/DECT/Virtual IP-DECT
Server”.
The Cisco Unified Communications Manager will be referred to as “CUCM”.
This guide is intended for qualified technicians and the reader is assumed to have a basic knowledge
about the Spectralink IP-DECT/DECT/Virtual IP-DECT Server and the Cisco Unified Com-
munications Manager. It is also assumed, that you have an installed and functioning Cisco Unified
CM Server and Spectralink IP-DECT/DECT/Virtual IP-DECT Server.
You can configure the Spectralink IP-DECT/DECT/Virtual IP-DECT Server solution to be used on a
Cisco Unified Communications Manager in two different ways:
l Third Party SIP device – described in this guide
Handsets configured as a Third Party SIP device will have basic integration.
To be able to register Spectralink handsets, phone licenses for 3rd party SIP are required. For
more information on License Unit Calculation and download of phone licenses to CUCM, see
the Cisco documentation.
l Spectralink IP-DECT/DECT – CUCM License and COP file (Cisco Options Package file)
installation (recommended) (not relevant to Spectralink IP-DECT Server 200)
Handsets configured with Spectralink IP-DECT profile will have a tighter integration with the
Cisco Unified Communications Manager, and will have access to additional features.
Having the Cisco Unified CM(Advanced Features) License installed it is also possible to:
l Predefine user data including CUCM device names manually in a user XML file for pro-
visioning.
l Predefine user data including CUCM device names manually in a CSV file in Spec-
tralinkIP-DECT/DECT Server format to be imported to the Spectralink IP-DECT/DECT
Server.
l Export user data from the Spectralink IP-DECT/DECT Server in a CSV file in CUCM
format to be imported directly to the CUCM.
The guide is divided into two parts:
l Spectralink IP-DECT/DECT/Virtual IP-DECT Server
l Cisco Unified Communications Manager
Each part describes the general configuration and the user administration.
Spectralink IP-DECT Server 200/400/6500, Virtual IP-DECT Server One and DECT Server 2500/8000 Interoperability Guide
To Next Page
Loading...
