Supported features Description/Setting
Basic Calling Allows user to make and answer calls.
Call Hold Allows user to put a call on hold.
Call Transfer Allows user to transfer the active call to some other number.
Call Waiting Allows user to answer another incoming call when already in an act-
ive call.
For more information, seeConfiguration > SIP > Call status and
parameter description in the web based Administration Page of the
server.
Call Forward (DECT end-
points only, not PBX or other
devices)
Allows the user to:
l Call forward unconditional - enable
Enable Call forward unconditional by dialing this code
*21*, followed by the desired extension ($= extension) and
#. E.g.: *21*$#
l Call forward unconditional - disable
Disable Call forward unconditional by dialing this code
#21#.
For more information, see "Enabling Feature Codes" on page13.
Message Waiting Allows users to know that they have new or unheard voice mail
messages.
Directed Call Park The Call Park feature allows user to place a call on hold so that can
be retrieved from another phone in the Cisco Unified Com-
munications Manager (e.g. a phone in another office or in a con-
ference room).
SIP Transport Methods SIP is designed to be independent of the underlying transport layer
protocol. Following Transport Methods are supported:
l UDP
l TCP
For more information, see "SIP Settings" on page9.
To Next Page
Loading...
