SpectraLink IP-DECT Server 400 - Configuration - SIP

14215700-IG, Edition 15.0
May 2020, Original document
388
Field
Type Select between the following certificate types; X.509 or
PKCS#12.
Click Import Certificate, if you want to import the certificate.
Click Remove, if you want to remove a certificate.
Note: If a certificate already exists, it must be removed
before you can import a new one.
Certificates - CA certificates
Click Browse to find the relevant CA certificate file (*.pem
file). E.g. a custom list of CA certificate files.
Click Import List, if you want to import the list.
It is also possible to; remove all CA certificates (Clear List),
restore default list of public CA certificates (Restore Default
List), or export the list of CA certificates in PEM format
(Export List).
Configuration - SIP
Field Setting
SIP Configuration - General
Local port Enter the local port number.
The local port is the port on which the Spectralink IP-
DECT/Virtual IP-DECT Server listens for incoming SIP-sig-
nalling.
The default local port number is 5060.
Transport Transport mechanism used for SIP messages.
Possible values: UDP, TCP or TLS.
Note: If TLS is used as SIP Transport Method, it is necessary
to import host certificate and CA certificates into the server.
For more information, see "Configuring Certificates" on
page169.
DNS method Used for looking up the destination of SIP messages.
Possible values: A records or DNS SRV.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide