Field Setting
Phonebook Configuration - Disabled
Disabled As default, phone book configuration is disabled.
You can configure the server to retrieve phone book data using
LDAP server or by import of phone book data from a CSV file.
Phonebook Configuration - Imported CSV file
Imported CSV file Enable this if you want to import phone book data from CSV
file.
Import Browse for the CSV file to import.
Note: The CSV file must contain correct format. For more
information, see "Parameter Overview" on page366.
Encoding Select the correct encoding for the CSV file. You can choose
between UTF-8, ISO/IEC 8859-1 or Windows-1252.
Note: The encoding depends on the software that was used to
generate the CSV file. If you use Microsoft Windows, you will
probably select Windows-1252.
Number fields Enter the indexes of the columns containing dialable numbers.
Phonebook Configuration - LDAP
LDAP Enable this if you want to configure the server to retrieve phone
book data using LDAP server.
Note: Secure LDAP (LDAPS) communication occurs over port
TCP 636. LDAPS communication to a global catalog server
occurs over TCP 3269. When connecting to ports 636 or 3269,
SSL/TLS is negotiated before any LDAP traffic is exchanged. If
using secure LDAP (LDAPS), the necessary certificates must
be installed. For more information about CA certificates, see
"Configuring Certificates" on page169.
For an example of LDAP configuation, see "Parameter Over-
view" on page366.
URI Enter the URI of the LDAP server.
E.g. ldap://example.org (or ldaps://example.org if using secure
LDAP)
To Next Page
Loading...
