Field Setting
User - User
PIN code (Optional)(Only visible
if Handset Sharing License is
loaded)
Enter a code in the PIN code field for added security to prevent
other users from linking a handset with your user profile.
The PIN code associates the user with a handset. For more
information, see "User Sign-in/Sign-out" on page316. See also
Lync/Skype for Business Interoperability Guide.
Standby text (Optional) Enter a standby text.
Note: Disallowed characters: <>\"
A standby text is a fixed label shown in the top left part of the
screen on the DECT handset when in idle state.
Note: This feature is only available if Spectralink DECT hand-
sets are being used. If third party DECT handsets are being sub-
scribed, this feature is not supported.
Disabled (Optional) If enabled, the user is disabled.
Note: A disabled user cannot make calls from the handset.
User - SIP
Username/Extension Must contain information used for SIP registration etc. E.g. the
"user" in a SIP URI.
Note: Allowed characters: a-z, A-Z, 0-9, -_.!~*'()&=+$,;?/
Secondary username (Optional) Enter a Secondary username.
Note: Allowed characters: a-z, A-Z, 0-9, -_.!~*'()&=+$,;?/
The Secondary username can be used to make voice calls, if
the connection to the SIP PBX is lost. The Secondary user-
name must be globally unique.
In some PBXs there is a mapping between username and num-
ber (e.g. Username = hz2539jk, Number = 1234). If the con-
nection to the SIP PBX is lost, then it is possible to make the
mapping internally by defining a Secondary username.
Note: The feature MUST be used with SIP setting Allow
internal routing fallback enabled. For more information, see
"Configuring SIP and IP-PBX Settings" on page136.
To Next Page
Loading...
