14205603-IG, Edition 11.0
May 2020, Original document
19
Cisco Unified Communications Manager
Below is a description of how to prepare the Cisco Unified Communications Manager, how to setup
phone security profile, how to add end users, how to add the DECT handsets either manually or
using the Bulk Administration Tool. Each individual DECT handset must be added as a 3rd party SIP
device in CUCM and the Spectralink IP-DECT/DECT/Virtual IP-DECT Server itself will not be
added and known to the CUCM.
Setting up Phone Security Profile
This section describes how to build a unique Phone Security Profile for the Spectralink IP-
DECT/DECT/Virtual IP-DECT Server or utilize an existing Phone Security Profile as long as it con-
forms to the recommended values below.
1. Navigate to Cisco Unified CM Administration > System > Security > Phone Security
Profile.
2. Click Add New.
3. In the Phone Security Profile Type list, select Third-party SIP Device (Basic), and then
click Next.
Spectralink IP-DECT Server 200/400/6500, Virtual IP-DECT Server One and DECT Server 2500/8000 Interoperability Guide
To Next Page
Loading...
