Spectrum Digital XDS560v2 - About This Manual; Notational Conventions; Information About Cautions; Related Documents

About This Manual
This document describes the module level operations of the XDS560v2 System Trace
JTAG Emulator. This emulator is designed to be used with digital signal processors
(DSPs) and microcontrollers designed by Texas Instruments.
The XDS560v2 System Trace JTAG Emulator is a table top module that attaches to a
personal computer or laptop to allow hardware engineers and software programmers to
develop applications with DSPs and microcontrollers.
Notational Conventions
This document uses the following conventions.
The XDS560v2 System Trace JTAG Emulator will sometimes be referred to as the
XDS560v2 STM, XDS560v2 System Trace Module, JTAG Emulator, or Emulator.
Program listings, program examples, and interactive displays are shown is a special
italic typeface. Here is a sample program listing.
equations
!rd = !strobe&rw;
Information About Cautions
This book may contain cautions.
This is an example of a caution statement.
A caution statement describes a situation that could potentially damage your software,
or hardware, or other equipment. The information in a caution is provided for your
protection. Please read each caution carefully.
Related Documents
- Texas Instruments document SPRU655d.pdf
- MIPI Alliance Recommendation for Test and Debug: Debug and MIPI System
Trace Connectors, Version 1.00.00, 5 June 2007