Spectrum SWS Series User Manual

11
10
Spectrum
TM
7. Water Bypass
For softener maintenance, you can isolate your water softener from the water supply using the bypass
valve located at the back of the control. In normal operation the bypass is open with the ON/OFF knobs
in line with the INLET and OUTLET pipes. To isolate the softener, simply rotate the knobs to the BYPASS
position.
You can use your water related xtures and appliances as the water supply is bypassing the softener.
However, the water you use will be hard. To resume treated service, open the bypass valve by rotating
the knobs to SERVICE position.
Please make sure bypass knobs are completely open otherwise the untreated water could bypass
through the valve.
Please make sure bypass knobs are completely open otherwise
untreated raw water could bypass through the valve.
NOTE
Service Bypass
Incorrect Bypass Position

Spectrum SWS Series Specifications

General

Brand	Spectrum
Model	SWS Series
Category	Water Dispenser
Language	English