EasyManuals Logo

Spectrum SWS Series User Manual

Default Icon
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background image
15
14
Spectrum
TM
1. Add two litres of water into the cabinet at the time of installation. This is for the unit to achieve
proper capacity in the rst time of regeneration.
2. Plug the power transformer into an approved power source. Connect the power cord to the valve.
3. When power is supplied to the control, the screen may display ‘Advancing to Service Wait Please’
while it nds the service position.
4. Manually step the valve to the BACKWASH position. If screen is locked, the screen will display”Key
Locked, Press and Hold “MENU” key for 3 Seconds to Unlock” . Follow the instructions below to step
the valve to BACKWASH position. As the valve arrives at BACKWASH position, unplug the power and
let valve stay at BACKWASH position.
9. Start-up Instructions
Press and hold MENU key for 3s
to unlock
Press and hold CONFIRM key
for 3s to advance to MANUAL
REGEN menu
Press CONFIRM key again to let
the option ash
Press DOWN key to advance to
IMMEDIATE option

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Spectrum SWS Series and is the answer not in the manual?

Spectrum SWS Series Specifications

General IconGeneral
TypeWater Dispenser
Voltage220-240V
ColorWhite
Water TemperatureHot and Cold
Filtration SystemMulti-stage filtration
Dispensing MethodPush-button
Safety FeaturesChild lock, overheat protection
Power500W
MaterialPlastic and stainless steel
CertificationCE, RoHS